So, I built an edging machine for tease and denial...
- puste
- Explorer At Heart
- Posts: 331
- Joined: Sat Dec 29, 2018 9:12 pm
- Gender: Male
- Sexual Orientation: Straight
- I am a: Slave
- Location: Europe
Re: So, I built an edging machine for tease and denial...
G3Genral This may be true in some part. I Have try "rollingprecummer" and yes it is some that come close.
But I have not found any Eastim files that stop the Estim more than just a few seconds.
And this is not the case by this Estim edging machine.
It will stop for a longer period of time. And when I say stop I mean stop, totaly stop (Cut connection).
But perhaps you know of other stim files that do this.
I wil try to get the Edging machine working with some more powefull motors and se if this is working.
The print I have made is now in some test setup and I think it will also work fine with motors.
I will return with more info.
I have also found a more technical description of the Pressure Sensor. And acoding to this information
it has to be other values for the resistor and capacitor. This is what thay descripe in the dokument:
100K potentiometer and 47 pF are general recommendations; your specific sensor may be best suited
with a different potentiometer and capacitor. Testing should be performed to determine this.
But I have not found any Eastim files that stop the Estim more than just a few seconds.
And this is not the case by this Estim edging machine.
It will stop for a longer period of time. And when I say stop I mean stop, totaly stop (Cut connection).
But perhaps you know of other stim files that do this.
I wil try to get the Edging machine working with some more powefull motors and se if this is working.
The print I have made is now in some test setup and I think it will also work fine with motors.
I will return with more info.
I have also found a more technical description of the Pressure Sensor. And acoding to this information
it has to be other values for the resistor and capacitor. This is what thay descripe in the dokument:
100K potentiometer and 47 pF are general recommendations; your specific sensor may be best suited
with a different potentiometer and capacitor. Testing should be performed to determine this.
-
- Explorer At Heart
- Posts: 464
- Joined: Sun Jun 11, 2017 12:53 am
- Gender: Male
- Sexual Orientation: Bisexual/Bi-Curious
- I am a: Switch
- Dom/me(s): Courtney
- Sub/Slave(s): Courtney
- Location: Virginia
- Contact:
Re: So, I built an edging machine for tease and denial...
I know that you can accomplish this using an inflatable butt plug and measuring contractions. I tried this approach with the force sensor and it didn't really work for me. Curious to see if you get it to work though!
Quote me, or PM me and I'll reply as soon as I can!
Tease AI Java
Mischevious Tease AI Java Personality
Tease AI Java Developer's Guide
TAJUtils Guide
Tease AI Java
Mischevious Tease AI Java Personality
Tease AI Java Developer's Guide
TAJUtils Guide
- puste
- Explorer At Heart
- Posts: 331
- Joined: Sat Dec 29, 2018 9:12 pm
- Gender: Male
- Sexual Orientation: Straight
- I am a: Slave
- Location: Europe
Re: So, I built an edging machine for tease and denial...
Then I finally got it to work somehow.
It was important to connect the sound from the PC to the relay instead of using the relay to interrupt the eStim signal.
Then its look like the pressure sensor does not go crazy.
The first board has a error. But this was easy to bypass. It was just the capasitor that has to go to parallel over
the 2 Mohm Resistor. But I have change the resistor to 680 Kohm. I think it was to sensitive with 2 Mohm.
I will upload a Picture of the assemble board. And the diagram of this board.
I simple love the result of the board and i have used it now for some time.
It was important to connect the sound from the PC to the relay instead of using the relay to interrupt the eStim signal.
Then its look like the pressure sensor does not go crazy.
The first board has a error. But this was easy to bypass. It was just the capasitor that has to go to parallel over
the 2 Mohm Resistor. But I have change the resistor to 680 Kohm. I think it was to sensitive with 2 Mohm.
I will upload a Picture of the assemble board. And the diagram of this board.
I simple love the result of the board and i have used it now for some time.
- puste
- Explorer At Heart
- Posts: 331
- Joined: Sat Dec 29, 2018 9:12 pm
- Gender: Male
- Sexual Orientation: Straight
- I am a: Slave
- Location: Europe
Re: So, I built an edging machine for tease and denial...
This is a picture of the assemble board.
- Attachments
-
- PCB Board Mount.jpg (857.35 KiB) Viewed 9908 times
- puste
- Explorer At Heart
- Posts: 331
- Joined: Sat Dec 29, 2018 9:12 pm
- Gender: Male
- Sexual Orientation: Straight
- I am a: Slave
- Location: Europe
Re: So, I built an edging machine for tease and denial...
This is the Layout of the board. I am planning to do a new board layout.
And this will have a variable resister and perhaps a reset bottom and the error will be corrected.
But for now this will work fine for me.
And this will have a variable resister and perhaps a reset bottom and the error will be corrected.
But for now this will work fine for me.
- Attachments
-
- PCB BoardLayout.jpg (81.56 KiB) Viewed 9908 times
- puste
- Explorer At Heart
- Posts: 331
- Joined: Sat Dec 29, 2018 9:12 pm
- Gender: Male
- Sexual Orientation: Straight
- I am a: Slave
- Location: Europe
Re: So, I built an edging machine for tease and denial...
Hi ski23
I do not think that the force sensor mention in this setup can be used for this approach.
But it you have used a another pressure sensor for Airflow it may work. Perhaps I will try this setup later.
My setup is only use 1x Flexiforce Pressure Sensor 25lbs. (https://www.sparkfun.com/products/8712)
I have place the sensor in a small plastic cylinder and put a rubber feet on to the sensor to get more pressure.
Found this approach in a youtube video.
- puste
- Explorer At Heart
- Posts: 331
- Joined: Sat Dec 29, 2018 9:12 pm
- Gender: Male
- Sexual Orientation: Straight
- I am a: Slave
- Location: Europe
Re: So, I built an edging machine for tease and denial...
And this is the diagram of my setup.
- Attachments
-
- Diagram.jpg (62.98 KiB) Viewed 9892 times
Re: So, I built an edging machine for tease and denial...
I’m so excited of your invention, so I have got my vibration motor already and waiting for shipping of the other parts... Hope that I’ll build my edging machine soon and if everything will be done ok I’ll definitely record a sample video to show everyone how it works ;)denial1234 wrote: ↑Fri Jul 11, 2014 4:03 pm Hey!
I like Tease and Denial and everyone who does is dreaming of a machine that drives him mad with lust by always stopping right before you reach an orgasm. I built such a machine. It's not absolutely perfect, but it's easy to assemble and more or less affordable. I give this document and all the ideas delivered within to the world for free. I read some other posts where people started to built their own and were all talkative about the project, but as soon as they made real progress there were sentences like "I wanna make a product out of it and get rich". Fuck this. Get horny, I say :)
So with this in mind, I wish you as much fun with this machine as I have! Do with my idea and its implementation what you want. It's even okay with me that you make a product out of it and get rich. But if you really do: Please try to get in touch with me and send me a free example ;)
My email: [email protected]
For those of you who have problems building this thing: It's a rare event that I check this email for new mails, since it's mostly an email for my porn accounts. So pleeeease use google and your own brain to solve problems. If there are any errors in this document...deal with it. I made this as properly as I could.
Of course I will check in here from time to time and see if there are real problems, but don't count on that.
For the females amoungst you: Sorry, but this will only work for men...I'd built some for you too, but my girlfriend is not into TnD as much as I am, so she won't volunteer as test person...But maybe this implementation gives you some ideas on how to adapt this version for a vagina :)
Since this thing involves electricity and americans may built such a machine: I am not responsible if you hurt yourself. It's nearly impossible, since we are dealing with ~5 Volts, but you never know. Think before you try something that might be a stupid idea and don't blame me if it goes wrong :)
Okay, that's everything from my side...let's start building stuff!!
How to build your own eding machine.pdf
-
- Explorer At Heart
- Posts: 464
- Joined: Sun Jun 11, 2017 12:53 am
- Gender: Male
- Sexual Orientation: Bisexual/Bi-Curious
- I am a: Switch
- Dom/me(s): Courtney
- Sub/Slave(s): Courtney
- Location: Virginia
- Contact:
Re: So, I built an edging machine for tease and denial...
I recently built the nogasm and can confirm it does work. I know they are pretty difficult to build and you can’t currently buy them online so I’ll be selling a few of them to people who can’t/don’t want to build one.smack wrote: ↑Fri Nov 01, 2019 11:08 amI’m so excited of your invention, so I have got my vibration motor already and waiting for shipping of the other parts... Hope that I’ll build my edging machine soon and if everything will be done ok I’ll definitely record a sample video to show everyone how it works ;)denial1234 wrote: ↑Fri Jul 11, 2014 4:03 pm Hey!
I like Tease and Denial and everyone who does is dreaming of a machine that drives him mad with lust by always stopping right before you reach an orgasm. I built such a machine. It's not absolutely perfect, but it's easy to assemble and more or less affordable. I give this document and all the ideas delivered within to the world for free. I read some other posts where people started to built their own and were all talkative about the project, but as soon as they made real progress there were sentences like "I wanna make a product out of it and get rich". Fuck this. Get horny, I say :)
So with this in mind, I wish you as much fun with this machine as I have! Do with my idea and its implementation what you want. It's even okay with me that you make a product out of it and get rich. But if you really do: Please try to get in touch with me and send me a free example ;)
My email: [email protected]
For those of you who have problems building this thing: It's a rare event that I check this email for new mails, since it's mostly an email for my porn accounts. So pleeeease use google and your own brain to solve problems. If there are any errors in this document...deal with it. I made this as properly as I could.
Of course I will check in here from time to time and see if there are real problems, but don't count on that.
For the females amoungst you: Sorry, but this will only work for men...I'd built some for you too, but my girlfriend is not into TnD as much as I am, so she won't volunteer as test person...But maybe this implementation gives you some ideas on how to adapt this version for a vagina :)
Since this thing involves electricity and americans may built such a machine: I am not responsible if you hurt yourself. It's nearly impossible, since we are dealing with ~5 Volts, but you never know. Think before you try something that might be a stupid idea and don't blame me if it goes wrong :)
Okay, that's everything from my side...let's start building stuff!!
How to build your own eding machine.pdf
Quote me, or PM me and I'll reply as soon as I can!
Tease AI Java
Mischevious Tease AI Java Personality
Tease AI Java Developer's Guide
TAJUtils Guide
Tease AI Java
Mischevious Tease AI Java Personality
Tease AI Java Developer's Guide
TAJUtils Guide
-
- Explorer At Heart
- Posts: 271
- Joined: Fri Apr 08, 2016 4:36 pm
Re: So, I built an edging machine for tease and denial...
Someone has also made a more simple build with Arduino.
https://github.com/night-howler/protogasm
Still a bit surprised some big Company hasen't start mass producing these, or maybe the market is to small :)
Or you can perhaps have the Nogasm made for you the pcb and solder part, if the items on the list from Nogasm are very common, don't know alot of this I just try to see if some part of the process can be simplified.
https://jlcpcb.com/smt-assembly
These looks like they can create from the BOM file also
https://www.pcbcart.com/assembly
https://www.pcbway.com
Probably is a more exspensive solution though perhaps, but it looks like you can go this way, when we don't have a place to order them assembled, but the PCB Board with components is my main problem I am not skilled enough to use a solder Iron like that :)
The difficult thing is figure out how to order the right thing, which is why I have not gotten any further with it yet.
https://github.com/night-howler/protogasm
Still a bit surprised some big Company hasen't start mass producing these, or maybe the market is to small :)
Or you can perhaps have the Nogasm made for you the pcb and solder part, if the items on the list from Nogasm are very common, don't know alot of this I just try to see if some part of the process can be simplified.
https://jlcpcb.com/smt-assembly
These looks like they can create from the BOM file also
https://www.pcbcart.com/assembly
https://www.pcbway.com
Probably is a more exspensive solution though perhaps, but it looks like you can go this way, when we don't have a place to order them assembled, but the PCB Board with components is my main problem I am not skilled enough to use a solder Iron like that :)
The difficult thing is figure out how to order the right thing, which is why I have not gotten any further with it yet.
[New Releases] 2021, find them here
viewtopic.php?f=25&t=24555
viewtopic.php?f=25&t=24555
-
- Explorer At Heart
- Posts: 304
- Joined: Wed May 21, 2008 5:43 pm
- Gender: Male
- Sexual Orientation: Straight
- I am a: Switch
- Location: Mid-Atlantic Region, USA
Re: So, I built an edging machine for tease and denial...
Too bad these all require anal access for the sensor. Love the concept, but I guess anatomy is what it is. LOL
-
- Explorer At Heart
- Posts: 464
- Joined: Sun Jun 11, 2017 12:53 am
- Gender: Male
- Sexual Orientation: Bisexual/Bi-Curious
- I am a: Switch
- Dom/me(s): Courtney
- Sub/Slave(s): Courtney
- Location: Virginia
- Contact:
Re: So, I built an edging machine for tease and denial...
Ive seen a EMG approach that doesnt use an anal probe but rather electrodes to detect the contractions.
Quote me, or PM me and I'll reply as soon as I can!
Tease AI Java
Mischevious Tease AI Java Personality
Tease AI Java Developer's Guide
TAJUtils Guide
Tease AI Java
Mischevious Tease AI Java Personality
Tease AI Java Developer's Guide
TAJUtils Guide
- puste
- Explorer At Heart
- Posts: 331
- Joined: Sat Dec 29, 2018 9:12 pm
- Gender: Male
- Sexual Orientation: Straight
- I am a: Slave
- Location: Europe
Re: So, I built an edging machine for tease and denial...
First I try to create one if the board in the github site. What a Nightmares. Could not get it to work.
But the setup is fine and thanks for sharing it for free.
I have now manage to make one of these board my self from the scematic taken from the layout.
The schematic on github also have some missing detail about pressure etc.
But I was suprise that no mistake was made to the first board created.
It took some time to figure out what is wrong with the code.
But after some time I found out that in the setting some address did not work.
And after comment this out in the code it seems to work as described.
With this new board you do not have to wory about all the connection to make to have this to work.
Furthermore I mange to have all component at top of the board and nothing can short the circuit for Data IN PIN.
So it is more simple to build. And even with no or litle experiense to solder, this is more simple to build.
If some is interested in the PCB I can upload it to my GitHub account. I have order and created the board at https://easyeda.com/. But any PCB maker kan create this from the PCB file.
It is working fine with both the 12V Mabuchi RS-555PH DC motor. But I have also try this with some lover voltage.
Just remember that the motor is DC and the board can run under 5V and 12V.
The next step is to try to create a comparable setup for a E-stim. To control this I have to figure out how to start
the E-Stim slow and ramp up.
But the setup is fine and thanks for sharing it for free.
I have now manage to make one of these board my self from the scematic taken from the layout.
The schematic on github also have some missing detail about pressure etc.
But I was suprise that no mistake was made to the first board created.
It took some time to figure out what is wrong with the code.
But after some time I found out that in the setting some address did not work.
And after comment this out in the code it seems to work as described.
With this new board you do not have to wory about all the connection to make to have this to work.
Furthermore I mange to have all component at top of the board and nothing can short the circuit for Data IN PIN.
So it is more simple to build. And even with no or litle experiense to solder, this is more simple to build.
If some is interested in the PCB I can upload it to my GitHub account. I have order and created the board at https://easyeda.com/. But any PCB maker kan create this from the PCB file.
It is working fine with both the 12V Mabuchi RS-555PH DC motor. But I have also try this with some lover voltage.
Just remember that the motor is DC and the board can run under 5V and 12V.
The next step is to try to create a comparable setup for a E-stim. To control this I have to figure out how to start
the E-Stim slow and ramp up.
- Attachments
-
- MyBoard_Top.png (45.97 KiB) Viewed 6220 times
-
- Explorer At Heart
- Posts: 464
- Joined: Sun Jun 11, 2017 12:53 am
- Gender: Male
- Sexual Orientation: Bisexual/Bi-Curious
- I am a: Switch
- Dom/me(s): Courtney
- Sub/Slave(s): Courtney
- Location: Virginia
- Contact:
Re: So, I built an edging machine for tease and denial...
For anyone still interested in this, I have a discord server dedicated to DIY sex toys (and specifically edging machines as well).
https://discord.gg/EvYbZBf
https://discord.gg/EvYbZBf
Quote me, or PM me and I'll reply as soon as I can!
Tease AI Java
Mischevious Tease AI Java Personality
Tease AI Java Developer's Guide
TAJUtils Guide
Tease AI Java
Mischevious Tease AI Java Personality
Tease AI Java Developer's Guide
TAJUtils Guide
Re: So, I built an edging machine for tease and denial...
Will this work with a OSR-2 and a Fleshlight sleve?
Did sombody tray it?
Did sombody tray it?
Who is online
Users browsing this forum: No registered users and 4 guests