Yesterday, I ran this and had a real gut-wrenching surprise. I had the calibration signal at 40% which I had fairly strong but not as strong as I could handle. Torture was a max of 100%. ... Nevertheless, this is really a great webtease for a timed self-bondage scene. There's a post I made back in ...

[/quote] I can recommend Magbound along with their timer lock . It uses a USB cable for power plugged into a small power bank. As a failsafe, if the timer device fails or you mis-program it, you'll only be locked until the power bank runs out of power. Or until your house catches fire unexpectedly a...

Today I ran the full tease and was really exciting! I was prudent in power level so I could stand every torture though quite strong. Yesterday, I ran this and had a real gut-wrenching surprise. I had the calibration signal at 40% which I had fairly strong but not as strong as I could handle. Tortur...

19Hellothere83 wrote: ↑Fri Dec 17, 2021 8:49 am We need more Estim teases ... but mean ones with a cool story and bdsm and pain involved

Yes Please!


I wish I had the talent to create estim web teases, but I don't. I just have hope that those who do will create ones like referenced above.

what kind of electrodes do you recommend? Depends on placement. As to material I prefer Aluminum, cooper, stainless steel. No chrome or nickel. Lately, I find a stainless-steel urethra sound to be a great electrode, but many do not want to try that. I find a bronze grounding clamp to be excellent f...

they are rubber. i know voltage at the very least passes through them, but pressing them onto my leg and fiddling with the sound and calibration, i didnt feel anything They are high resistance and as such I almost never use them. It takes a lot more power to feel a sensation through them. Neverthel...

if there is indeed a good enough current going through it, why cant i feel it on my leg for instance? I'm not recommending you do this, but it is what I do. With both electrodes (are they metal or conductive rubber?) on the same leg and with a conductive gel (salt water can work too) see if you can...

i managed to complete my box but im having trouble getting it to work properly. idk if its because of user error or a wrong setup tbh. ive tested it with the multimeter (mostly using continuity to see if the electrodes are indeed working properly) and ive noticed that either my multimeter cant prop...

Thanks for all the help from the pioneers here. I just completed my new setup. I have been breadboarding it but just finished soldering everything in my aux. box. I choose to go with a completed Bluetooth amp and build a box for the contacts, transformers, and current limiting resistors. It's nice t...

Just finished the auxiliary box which has the two transformers and current resistors. The box has for banana plugs for input and four for output. By combining the two common output I get a tri electrode setup otherwise it is two electrically isolated stereo channels. Since the power resistors are ov...

It works! Just hooked one channel together. Used blue tooth to feed in the audio from one of the estims here. I had the 4 ohm power resistor in series on the line from the amp to the transformer. I used the 4 ohm tap on the transformer. On the output I used the common and yellow which on my set of ...

From the amplifier each channel positive goes to a 5.6 ohm 10W resister which then feeds to the 8 ohm lead of a 70V transformer. Each channel negative goes directly to the common on the same side of the transformer. I use the 1W lead for the electrode positive lead and the common lead for negative....

Has anyone tried to break open a wall wart and use the transformer from those? Recent PS are switching not transformer based. If you have a transformer based (usually heavier) it is likely well encased, may be potted so breaking open will likely end up breaking leads or damaging the windings. I gue...

Would this one work better in your opinion? https://fosiaudio.com/collections/2-channel-amplifier/products/fosi-audio-v1-0b-power-amplifier-2-channel-stereo-audio-mini-hi-fi-class-d-integrated-tpa3116-amp-for-home-passive-speakers-50w-x-2-with-19v-4-74a-power-supply-black?_pos=10&_fid=1060e1696...

Thanks again.
I've ordered the amp. a pair of transformers and the 4 ohm resistor. I'll let everyone know how it works when I get it setup and tested.